Efficient Belt type Roots Blower

Key Feature

Low Noise & Minimal Vibration
Noise and vibration reduction have been the main emphasis in developing the new series of roots blower.Kingood blower rotor concept was adopted based on its flow characteristics which is very stable and even, and also coupled the fact that it shows a considerable reduction of both noise and vibration. The extent of reduction can even allow the smaller unit to operate without the need of a silencer.

Major Specifications of Type TS/KS (2-lobes)
& ARS/KRS (3-Lobes)
Bore Size: 3/4" to 12" (20~300A)
Air Capacity: 0.2~191.3 (m3/min)
0.2K~191.3K (liter/min)
Maxi Pressure: 8000mmAq
(0.8 kgf/cm2)(78.4kPa)
Motor Power: 0.5~350Hp(0.375~260Kw)

Features
Long Durability
Easier to maintenance
No lubrication and no breakdown
Self Adjustment of Air Flow (Optional accessory)
Cover well-range size

i, High-pressure Roots Blower Low noise
Efficient Belt type Roots Blower with adoption of helical tri-lobe roots rotors and the discharge port of special geometry, the airflow noise is much lower compared to typical straight-lobe roots blower. The noise level can be reduced by 8db in the band of low frequency; hence the noise in the surroundings of blower can be significantly improved.

JHJHBJH
ii, High adiabatic efficiency
High-pressure Roots Blower with design of helical tri-lobe roots rotors, Efficient Belt type Roots Blower the airflow pulsation is less and the air streamline would be more stable. Therefore the fluctuation in airflow is less and then the energy waste can be reduced. Additionally, the instantaneous backflow of discharge is lower by the design of special discharge port. Compared to straight-lobe roots blower, the adiabatic efficiency can be raised up to 20%.

HJJHBJH
iii, High-pressure Roots Blower Super Energy saving
Compared to the typicalEfficient Belt type Roots Blower under the same operation conditions of discharge pressure and airflow volume, the power consumption of helical tri-lobe roots blower will be lower by 20.