MRT-065 three lobes roots blower pumps for wastewater treatment

MRT-65 three lobes roots blower pumps for wastewater treatment

Features

• Stable air flow and fewer pressure variations
• Clean air; with no oil dirty particles
• Construction is simple and easy to maintain
• Bearings and gears are lubricated with oil on end side of the blower
• All of product can be used for OEM
• Proven design, backed by a 1-year warranty

Adnentage

Wider range for volume,pressure and horse power.

• Bore 40mm to 400mm(1.5” to 16”)
• Pressure:1000 to 8000 mmAq (Air cooled)
• 8000 to 10000 mmAq (Water cooled and the type model is LT-#W)
• Horse power:0.5 to 700 Hp
• Capacity:0.5 to 360 m³ /min

Why select Three Lobes Roots Blower

LOWER ENERGY CONSUMPTION

Three lobes’ design control backflow pressure to rotor so reduce energy consumption.

LOWER NOISE

Pressure pluses are the major noise source of blower.

Three lobes’ design can efficiently reduce noise by approximately 5dB.

MRT-065 three lobes roots blower pumps for wastewater treatment BEARING LIFE

Less vibration transmitted through the lobe results approximately 20% MRT-065 three lobes roots blower pumps for wastewater treatment bearing life.

Conventional blowers result pressure pluses and vibration rob power and shorten the life of every bearing, gear and other drive train components.

We offer one year warranty for our roots blowers.

Trade terms:

EX-work,CIF,CNF,Door To Door

Payment:

• T/T,L/C at sight
• Paypal
• Western Union
• Credit Card

Delivery Date:

About 7-14 days after receiving your payment or L/C at sight (Standard Specification)

Shipping:

By sea, By air,Express delivery

CE / UL / SGS / D&B Certified and Patent

*The information provided here is for reference only

=CONTACT US=

i, High-pressure Roots Blower Low noise
MRT-065 three lobes roots blower pumps for wastewater treatment with adoption of helical tri-lobe roots rotors and the discharge port of special geometry, the airflow noise is much lower compared to typical straight-lobe roots blower. The noise level can be reduced by 8db in the band of low frequency; hence the noise in the surroundings of blower can be significantly improved.

JHJHBJH
ii, High adiabatic efficiency
High-pressure Roots Blower with design of helical tri-lobe roots rotors, MRT-065 three lobes roots blower pumps for wastewater treatment the airflow pulsation is less and the air streamline would be more stable. Therefore the fluctuation in airflow is less and then the energy waste can be reduced. Additionally, the instantaneous backflow of discharge is lower by the design of special discharge port. Compared to straight-lobe roots blower, the adiabatic efficiency can be raised up to 20%.

HJJHBJH
iii, High-pressure Roots Blower Super Energy saving
Compared to the typicalMRT-065 three lobes roots blower pumps for wastewater treatment under the same operation conditions of discharge pressure and airflow volume, the power consumption of helical tri-lobe roots blower will be lower by 20.