2.2KW High Volume Centrifugal Air Blower

2.2KW High Volume Centrifugal Air Blower

Side channel 2.2KW High Volume Centrifugal Air Blower pump exploit the laminar flow principle.A large selection of model ranges made possible fast spreading of these pumps to many applications:aeration in waste water treatment stations,bubble aeration of 2.2KW High Volume Centrifugal Air Blowerling baths,drying devices,and systems for granulate and powder transport.

Features:

1. Beautiful surface
2. Easy installation
3. Low noise level
4. No vibration, and complete dynamic stability
5. Pulsation-free discharge
6. Minimal maintenance
7. Higher pressure ratio
8. Cooler running bearings
9. 2.2KW High Volume Centrifugal Air Blower grease life
10. Simple maintenance
11. 100%oil-free air
12. Suitable for environmental protection
13. Small dimensions
14 continuous duty

Working Principle:

The gas is taken in through Inlet 1. As it enters from Side channel 2, the rotating Impeller 3 impacts velocity to the gas in the direction of rotation. Centrifugal force in the impeller blades accelerates the gas outward and the pressure increase. Eveyratation adds kinetic energy resulting in the further increase of the pressure along the side channel. The side channel n2.2KW High Volume Centrifugal Air Blower at the rotor, sweeping the gas off the impeller blades and discharging it through the Outlet Silencer 4 where it exits the side channel blower.

Parameters:

Accesories:

Application:

Before You Start

1.Take measures to minimize the loss of the pipeline in order to reduce the loss of pressure and flow.

2.Use the occasion to correctly estimate the pressure and flow of the work place, in order to select the appropriate type of air pump and piping.

Precautions Use Note power supply voltage is adapted.Boot and run for 10 minutes before using the gas source.

3.Normal working power floating shall not exceed ten percent of the rated voltage.

4.Pump should be placed above the horizontal ventilated and dry place.

5 non-hazardous liquids into the pump body.

6.The air pump not have a corrosive, explosive materials used near.Air pump using ambient temperature -10 ~ 40 altitude higher than 1000 m parameters will change.

7.Users should professionals device protection switch and ground.User maintenance, overhaul air pump should be cut off the power.

If the quantity ordered is large, it could be sent by ship, of which the price will be much lower than express.

If you are interested in our products, please don't hesitate to contact me.

Providing you with the excellent quality is our aim

i, High-pressure Roots Blower Low noise
2.2KW High Volume Centrifugal Air Blower with adoption of helical tri-lobe roots rotors and the discharge port of special geometry, the airflow noise is much lower compared to typical straight-lobe roots blower. The noise level can be reduced by 8db in the band of low frequency; hence the noise in the surroundings of blower can be significantly improved.

JHJHBJH
ii, High adiabatic efficiency
High-pressure Roots Blower with design of helical tri-lobe roots rotors, 2.2KW High Volume Centrifugal Air Blower the airflow pulsation is less and the air streamline would be more stable. Therefore the fluctuation in airflow is less and then the energy waste can be reduced. Additionally, the instantaneous backflow of discharge is lower by the design of special discharge port. Compared to straight-lobe roots blower, the adiabatic efficiency can be raised up to 20%.

HJJHBJH
iii, High-pressure Roots Blower Super Energy saving
Compared to the typical2.2KW High Volume Centrifugal Air Blower under the same operation conditions of discharge pressure and airflow volume, the power consumption of helical tri-lobe roots blower will be lower by 20.