MFSR-300H roots blower and vacuum pump

1. Using advanced spiral back into the exhaust port and within the technique, the body effectively delayed the return of high pressure shock body, so fans, the noise is significantly lower.

2. Rotor the use of advanced composite curve and improve the efficiency of the blower.

3. Sealing structure is reasonable, oil and gas can not enter the device and therefore, the output air is clean, free of grease.

4. High precision, hardened gears, so that further increase machine life and reduce noise.

5. Rotor, cases, wall panels and other key components, to achieve the digital processing, improved product quality and production efficiency.

Standard accessories:

1.General base

2.uction muffler

3.fety valve, check valve

4.ressure gauge,Lubricating oil

i, High-pressure Roots Blower Low noise
MFSR-300H roots blower and vacuum pump with adoption of helical tri-lobe roots rotors and the discharge port of special geometry, the airflow noise is much lower compared to typical straight-lobe roots blower. The noise level can be reduced by 8db in the band of low frequency; hence the noise in the surroundings of blower can be significantly improved.

JHJHBJH
ii, High adiabatic efficiency
High-pressure Roots Blower with design of helical tri-lobe roots rotors, MFSR-300H roots blower and vacuum pump the airflow pulsation is less and the air streamline would be more stable. Therefore the fluctuation in airflow is less and then the energy waste can be reduced. Additionally, the instantaneous backflow of discharge is lower by the design of special discharge port. Compared to straight-lobe roots blower, the adiabatic efficiency can be raised up to 20%.

HJJHBJH
iii, High-pressure Roots Blower Super Energy saving
Compared to the typicalMFSR-300H roots blower and vacuum pump under the same operation conditions of discharge pressure and airflow volume, the power consumption of helical tri-lobe roots blower will be lower by 20.