grain conveying roots blower

1.low noise

with adoption of helical trilobe roots rotors and the discharge port of special geometry,the airflow noise is much lower compared to typical straight-lobe roots blower.The noise level can be reduced by 8db in the band of low frequency,hence the noise in the surroundings of blower can be significantly improved.

2.Super Energy Saving

Compared to the typical roots blower under the same operation condition of discharge pressure and airflow volume ,the power consumption of helical tri-lobe roots blower will be lower by20

As a kind of typical gas pressurization and conveying machinery, aeration roots blower in the specific pressure area has wide applicable characteristics. grain conveying roots blower The traffic is usually 0.5 ~ 800 m3 / min, up to about 1400 m3 / min, single stage work pressure of 53.3 ~ 98 kpa, two-stage series,aeration roots blower which can realize - 80 ~ 200 kpa.
JHGJHVHGV
In terms of application, most of grain conveying roots blower for the use of air blower. Their use in building materials, aeration roots blower electric power, metallurgy, chemical and petrochemical, mining, ports, textile, pharmaceutical, paper making, aquaculture and so on many fields. Using air tightness good sealing device, grain conveying roots blower also can be used to transport air outside of the gas, such as hydrogen, industrial oxygen, carbon monoxide, carbon dioxide, hydrogen sulphide, methane and acetylene, coal, etc.
KHJHVJDGAD